Ticket To The Moon Hammock Hammock Wall Anchor

With the Ticket to the Moon mounting kit, you can hang your hammock indoors as well as anywhere you find concrete, wood or stone walls

Included in the set:

• 2 x hooks
• 2 x screws
• 2 x dowels
• 2 x washers
• 1 x assembly instruction

You still need

• 1 x drill
• 1 x 10 mm drill bit
• 1 x 17 mm wrench

With wooden surfaces you don’t need dowels, you can screw the screws directly into them.

It’s as simple as this:

• Find two walls about 2.7 – 3 m apart. If the walls are further apart, you can also use ropes.
• The hooks should be placed at a minimum height of 1.3 metres. If the distance is more than three meters, place the hooks higher, otherwise you won’t get a 30° angle and might touch the ground 😉
• Now drill a hole with a 10 mm (3/8″) drill bit into the concrete or stone wall, check the hole depth by screwing and then clean the hole with a brush or blow out excess dust with a straw.
• Carefully insert the plug into the hole.
• Now screw the screw together with the washer and the hook into the dowel until it is firmly tightened.
• Then attach your ropes or moon straps to the hook and enjoy your hammock as you are used to, but sit in it carefully the first time and check that the hooks are securely mounted. Please do not attach the aluminium carabiner directly to the hook, otherwise it could be damaged!